Below we have the TDMA used in csfl-lib-1.0:
1. P1 terms of all volumes of faces West and South are evaluated, including the fictitious volumes;
2. The remaining P terms are evaluated, to execute line-by-line and column-by-column sweepings;
3. The Qm terms are calculated to carry out a line-by-line sweeping;
4. Evaluation of all properties at the West face, Eq. (9.12);
5. It is executed the line-by-line evaluation of the whole domain (9.4);
6. After line-by-line calculation we do the column-by-column evaluation, therefore Qm terms are calculated to do a column-by-column sweeping;
7. All properties at the south face are calculated, equation (9.12);
8. All properties are evaluated at the South face, Eq. (9.4);
9. Then the residue is calculated with the information obtained from the linear system, Eq. (9.1.1);
10. The stopping criteria are checked, and if one of them is satisfied the calculation stops. Otherwise we go to item 3.
|