To visualize the temperature field, select the option Temperature in the 3D View menu (Figure 62). |
||
 Figure 62 – CFD-Studio main Console. |
||
You can remove the mesh from the visualization by clicking in Geometry and after in Mesh (disabling), as in Figure 63: |
||
 Figure 63 – Console of the Post-processor |
||
| By that you will have a clearer vision of the colors (Figure 64). |
||
 Figure 64 – Console of the Post-processor |
||
| You can also visualize just the isotherms. To do this click in Date and just leave the Isovalues item selected, as shown in Figure 65: |
||
 Figure 65 – Console of the Post-processor
|
||
| To visualize the velocity field, select the option Velocity in the 3D View menu (Figure 66). | ||
 Figure 66 – CFD-Studio main Console.  Figure 67 – Console of the Post-processor |
||
Notice that only the Vector Map option is available (Figure 68), that is because the velocity field just has vector Map. |
||
 Figure 68 – Console of the Post-processor |
||
You can visualize the results without walls (Figure 69), with translucent walls (Figure 70) or with walls in gray color (Figure 71). To do this, just click in the Geometry manu and leave the items selected according to your needs. |
||
|
||
| The x,y and z axes, and the xy Cartesian domain, can also be removed. Click in Geometry and un-select the Axis xyz to remove the axes and in Plane xy to remove the Cartesian domain. See Figure 72. |
||
|
||
Back Page Next Page |
||
| © SINMEC/EMC/UFSC, 2001. | All rights reserved. | |
